◆ 可選帶以下功能： Optional with the function as follows:

→ 雙極常開 DPNO (Double Pole Normally Open)

→ 單極常開 SPNO (Single Pole Normally Open)

◆ 可選帶以下鎖定類型： Optional with Following lock types:

→ 無鎖 No Lock

→ 閉合鎖定 Lock-on

→ 斷開鎖定 Lock-off

→ 斷開鎖定帶閉合鎖定 Lock-off with Lock-on

◆ 可選帶以下附件： Optional with the accessor as follows:

→ 濾波電容（電容值由客戶選定，一般為0.22uF或0.33uF） Suppression capacitor (commonly 0.22 or 0.33μF)

→ 電纜線壓線板和螺釘 Pressing Board for Cable and Screw

◆ TS12 系列是一款專用性的大電流扳機開關，集成防塵功能，內部為快速動作結構，適合大功率的電動工具，如：型材切割機，斜切鋸（介鋁機），180和230角向磨光機，重型電錘，重型電鎬等。主體和扳機可按照客戶要求進行定制。

◆ TS12 series are special type high rated trigger switch, integrated dustproof, withsnap-action structure, for used in high rated power-tools such as: Cut-off Machines, Miter Saws, 180mm and 230mm Angle Grinders, Heavy Rotary Hammers, Heavy Demolition Hammers, etc. The body and trigger accept customize according to customer's request.

→ 機械耐久壽命 Mechanical life endurance	≥1E5
→ 電氣耐久壽命 Electrical life endurance	≥5E4
→ 最大沖擊電流 Max. Inrush current at 250V	120A
→ 最大沖擊電流 Max. Inrush current at 127V	144A
→ 接觸電阻 Contact resistance	≤30m Ohm
→ 絕緣電阻 Insulation resistance	≥7M Ohm
→ 基本介電強度 Dielectric strength of function	1500V
→ 加強介電強度 Dielectric strength of reinforced	3000V
→ 環境溫度 Ambient temperature	0℃~55℃
→ 阻燃等級 Flammability	UL 94V-0
→ 防護等級 Protection type	IP40
→ 適用于II類防護器具 Suitable for appliances of protection class II

◆ 輸入端 Input side:

→ 2×接線柱端子 / 螺釘M4 4×Pillar teminal Φ=3mm / Screw M4

◆ 輸出端 Output side:

→ 2×插片端子 Plug-in terminals 6.3×0.8mm